Quote:
Originally Posted by Omar.c
The legend alohasurftoad! I've been religiously following all your x-drive wheel/tire recommendations for my next set up, I was mainly considering 245/35/19 and 285/30/19 but my only concern is the overall width of the rear. I don't want it to poke and would like to have it flush with the oem 437m - would that be possible on an f32? I saw that post you linked with the silver f30 with the same set up (245/285) a little while back, but I understand there are some minor differences between the f30 and f32? My roads are pretty new and smooth so I'm okay with going with a slightly lower sidewall compared to 235/265.
|
me not legend...haha
here is 285/35/18(25.9")@ET40 on a lightly lowered F32, 285/30/19(25.7") is slightly less girth, 3-dimensionally.
https://f30.bimmerpost.com/forums/sh...07&postcount=2
here is 285/30/19(+245/35/19) on an F36, stock m-sport height
https://f30.bimmerpost.com/forums/sh...5&postcount=20
i believe the 4 series are wider and because you are decently lowered, the added negative camber will help keep the upper tire shoulder flush or 1-2 mm on the poke side of flush at most. if you still feel that might bother you then 275/30/19 might be the way to go in the rear.