Pure turbo inlet pipe

TheMonkey · 05-03-2024, 07:43 PM

What’s happening,

I just got done installing a pure turbo inlet pipe and oil catch can and started receiving code 160504 - crankcase ventilation heating broken

Going to double check how tight everything is but any idea otherwise?

LA1Z24 · 05-03-2024, 08:01 PM

The pipe that runs from the front of the valve cover, down to the turbo inlet. On the turbo inlet side is a small 2 pin connector. That is the wire for the heater. I suspect you didn't plug it back in after the install.

TheMonkey · 05-04-2024, 07:51 AM

Quote:

Originally Posted by LA1Z24

The pipe that runs from the front of the valve cover, down to the turbo inlet. On the turbo inlet side is a small 2 pin connector. That is the wire for the heater. I suspect you didn't plug it back in after the install.

You were 100% right! Thanks a lot my man!!

05-03-2024, 07:43 PM	#1
TheMonkey New Member 3 Rep 10 Posts Drives: 2014 Red 335i Sportline Join Date: Jul 2018 Location: South Florida iTrader: (0)	Pure turbo inlet pipe - 160504 code What’s happening, I just got done installing a pure turbo inlet pipe and oil catch can and started receiving code 160504 - crankcase ventilation heating broken Going to double check how tight everything is but any idea otherwise? __________________ 2014 Red Sporline 335i (f30) Mods: Dinan Carbon Fiber Air Intake Carbon Fiber Kidney Grills VTT Crank-bolt Capture & Seal
	Appreciate 0 Tweet Quote

05-03-2024, 08:01 PM	#2
LA1Z24 Captain 367 Rep 780 Posts Drives: 2014 435i M Sport Join Date: Oct 2020 Location: Long Island iTrader: (0)	The pipe that runs from the front of the valve cover, down to the turbo inlet. On the turbo inlet side is a small 2 pin connector. That is the wire for the heater. I suspect you didn't plug it back in after the install.
	Appreciate 1 _ObiJon207.50 Quote